Wooden Camera - Camera Cage for Sony RX0
Wooden Camera - Camera Cage for Sony RX0 by Wooden Camera at Chicago Lighting Design. MPN: 256900. Hurry! Limited time offer. Offer valid only while supplies last. Sony RX0 Camera Cage is a form fitting cage that attaches by one 1/4-20 screw on the bottom and touches the camera on multiple sides to lock it securely in place. There are 1/4-20, 3/8-16, and ARRI accessory mounts on all sides allowing easy attachment of a Ultra Arms, Magic Arms, accessories, or other production rigging. The battery door can open easily for battery changes without having to remove the camera and the back cover is unobstructed allowing access to the micro SD card slot and HDMI
Product Description & Reviews
Sony RX0 Camera Cage is a form fitting cage that attaches by one 1/4-20 screw on the bottom and touches the camera on multiple sides to lock it securely in place. There are 1/4-20, 3/8-16, and ARRI accessory mounts on all sides allowing easy attachment of a Ultra Arms, Magic Arms, accessories, or other production rigging. The battery door can open easily for battery changes without having to remove the camera and the back cover is unobstructed allowing access to the micro SD card slot and HDMI port. Features: 1/4-20 holes - in standard spacing (9mm center to center) 3/8-16 holes - for larger accessories and tripod mounting ARRI standard accessory mount is available on top, left, and bottom sides Includes: (2) 1/4-20 x 3/8" screw Specifications: Weight: 100g (0.22 lbs) Dimensions: 82.55 x 63.5 x 41.8 mm (3.25 x 2.5 x 31.75 in)
Features & Highlights
- 1/4-20, 3/8-16, and ARRI accessory mounts
- Compatible with Sony RX0
- Battery door and buttons easily accessible
2.5 x 1.75 x 3.25 inches
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Wooden Camera, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
mpn: B429722, ean: 0192223043053,
Designed for use with light weight fluorescent or other fixtures weighing no more than 25 lbs.(11.4kg.) Engineered to telescope from the grid with nominal ceiling clearance. Telescoping Hangers are available in a wide range of lengths and attachment options for both temporary and permanent placement of lighting fixtures. Constructed of aluminum with internally welded safety collars and cast aluminum fittings. Hanger will accept all pipe clamps currently being manufactured. Size and weight is
mpn: KG702311, ean: 6954016522411,
The Convi Clamp is more than just an amazing clamp, it's the foundation of an entire grip system. The all-metal Convi Clamp is made from a lightweight alloy that will support loads of up to 44 lbs (20 Kg)! It features a hexagonal receiver that accepts dozens of Convi accessories from a simple stud to the versatile Max Arm to mount almost any light fixture, camera or accessory. The receiver features a spring locking safety system to ensure that the Convi accessory won't separate from the clamp
mpn: CC130, ean: 0847628556089,
The Impact C210 Baby Pipe Clamp fastens to pipes with diameters of 0.39 to 2.16''. It has a 5/8'' mounting stud and a load capacity of 220.46 lb (100 kg). A safety cable is included.5/8'' Pin. Aluminum Construction. 220.46 lb Load Capacity.
The Impact Super Clamp with T-Handle is a staple on any set or shoot. Like gaffer's tape, this is a piece of gear that you'll always find a use for. Its strong rubber-padded jaws open up to 2.16'', then lock securely with the short, ergonomic knob. For better grip on flat surfaces, a furniture wedge is included . The Super Clamp has 1/4''-20 female threads and a push-button, locking 5/8'' hexagonal female receiver. A hex-base 5/8'' Baby stud with a 1/4''-20 male threads on top is included for